Home
Company Profile
Product Range
Conditions of Sale
Contact Us
 
Products
:.Cork Sheet & Gaskets
:.Flange Insulation Kits
:.Garlock Gasket Products
:.Gore-Tex® Expanded PTFE
:.Graphite Products
:.James Walker Products
:.Metal Ring Type Joints
:.Metal Shims & Components
:.Non-Asbestos Jointing
:.O-Rings
:.Packing Products
:.PTFE Products
:.Rubber Mouldings
:.Rubber Sheet & Gaskets
:.Sampson Cut Gaskets
:.Sampson Exchanger Gaskets
:.Spiral Wound Gaskets
James Walker Products
Official stockist for
James Walker Products
 
Flange Insulation Kits
Sampson flange insulation kits offer effective cathodic protection against corrosion in flanged piping systems. Available in three types (see below), each kit comprises of one insulating gasket (either an oval ring type joint or flat gasket dependant on flange type.), one insulating sleeve per bolt, two insulating washers per bolt and two plated steel washers per bolt.
TYPE `D' : For use on ring joint flanges. Insulating gasket manufactured from reinforced phenolic. Insulating sleeve manufactured from either phenolic, mylar, or polyethylene. Insulating washers manufactured from reinforced phenolic.
TYPE `E' : For use on flat face & raised face flanges. Insulating gasket manufactured from either reinforced phenolic, or high di-electric strength non-asbestos. Insulating sleeve manufactured from either phenolic, mylar, or polyethylene. Insulating washers manufactured from reinforced phenolic.

TYPE `F' : Central gasket locates inside the bolts. Insulating gasket manufactured from either reinforced phenolic, or high di-electric strength non-asbestos. Insulating sleeve manufactured from either phenolic, mylar, or polyethylene. Insulating washers manufactured from reinforced phenolic.

 
Component Neoprene faced
phenolic gasket		 Reinforced Phenolic insulating washer Polyethylene insulating sleeve Phenolic insulating sleeve Mylar
insulating sleeve		 High
dielectric strength
non-asbestos
Dielectric Strength
(Volts/mm)		 500 200 400/500 140 4000 1500
Compressive Strength
(PSI)		 39000 - - - - -
Flexural Strength
(PSI)		 22500 22000 - - - -
Water Absorption
(%)		 1.6 1.0 0.01 1.0 0.8 10.6
Max Operating temp
(Celsius)		 107 107 66 107 180 540
Please contact our sales office for further information
Disclaimer - The information contained herein is given in good faith. No liability will be accepted in relation to the same. Sampson Gaskets Limited exclude all conditions or warranties, express or implied as to their products and/or their fitness for any particular purpose

Unit 22, Leigh Road, Haine Industrial Estate,
Ramsgate, Kent CT12 5EU England
 
Contact Us

Telephone:
(01843) 854800
(08700) 349990

Fax:
(01843) 854801
(08700) 349991

Email:
UK Sales -click here
Export Sales -click here
News
16.04.2007
Sampson Gaskets relocate to new premises
Links

Gore Products
© 2007 Sampson Gaskets Limited Wesite designed and hosted by Supersys