Availability :
Thicknesses : 0.35mm, 0.40mm, 0.50, 0.80mm
Widths : 5.5mm to 1000mm
Lengths : 10 metres to 100 metres
Density : 0.7 to 1.1 gr/cm³ Sealing
Material for :
- Nuclear
Power Stations & equipment
- Entire
industrial range of high & low temperatures and pressures
- Most
corrosive chemical fluids, steam or gas
- Engine
gaskets, Exhaust gaskets
- Sensitive
or difficult flanges e.g. enamel, glass, ceramics, graphite
- Low
or high flange loads
- Protective
linings against hot gases, Electrical contact or heat conductive
material - heatshields
Style
A80 will increase yield for gasket cutting and will accommodate
large gaskets for applications in heat exchangers, vessels,
reactors and pump casings etc. Style A80 has the identical
technical specification as Style A70, it can be cut into
1000mm squares and laminated under high compression to achieve
various thicknesses of Style A70. Density can be controlled
between 0.7 to 1.1 gr.cm³. Please see Style A70 data sheet
for more information.
Specify
Style A80 & A70 for a positive seal in all your industrial
equipment. It is the seal of dependability for now and the
future. |
16.04.2007
